CASCADIAN^®
Professional Water Treatment Products

O₃ Water Systems, Inc.
17700 147th St SE
Suite F
Monroe, WA 98272
USA

Phone: 360-794-9511
Fax: 360-794-0856

CASCADIAN^® CATS250

OZONE GENERATOR

Product Specification

• Ozone Generation
  Silent Pulse injection corona discharge.
  
• Ozone Production
  250 mg/h from ambient air 50% R.H.
  
• Dimensions
  457mm high x 245mm wide x 112mm deep (18" x 10" x 4.5") powder coated aluminum cabinet with key holes for wall mounting.
  
• Warnock & Hersey Certified
  CSA file L18014 - Canada.
  ETL file #98260 - USA.
  
• Power
  120V/50-60Hz or 220V/50-60HZ, 25W Special order 12-24VDC, 25W.
  
• Internal O3 Level Setting
  Typical 0.02 PPM ±0.01.
  
• Ozone Safety
  Internal ozone sensor shuts down the ozone generator when the level of ozone reaches 0.02 PPM, levels very common in the pristine nature. The government standards allow for a maximum of 0.08 PPM.
  
  An internal resistor provides a permanent maximum corresponding to the size of the room in which the unit will be operated. Thus in the case of sensor failure, severe over-ozonation will not result. For additional safety and peace of mind - operation is not recommended in a bedroom during sleep time.
  
• Indirect Health Benefits
  Ozone residual is achieved only when
  all gases are oxidized. Ozone removes virtually all toxic smells in homes, offices, hospitals and other closed spaces by direct oxidation to mostly harmless non-toxic substances such as carbon dioxide.
  
  Certain bacterial, viral and fungal reduction is achieved only when at least 0.01 PPM is established throughout the whole treated space.
  
• Warranty
  1 year limited.
  
• Installation
  Refer to Cascadian's installation manual.
  
• Optional Ozone Control
  10-position switch where frequent moving from room to room is required.